The Trick to Hanging Outdoor String Lights

Things to Avoid

• Lightweight hooks and nails. Instead, opt for zinc-plated hardware rated for 100+ pounds.
• Adhesive hooks. Anything adhesive is bound fail under the weight and strain of the lights, especially in varying weather conditions.
• Specialized vinyl siding clips/siding clamps. While these might be suitable for holiday string lights or very lightweight cafe lights, they'll struggle to support any tension from heavier light strands.
• Indoor extension cords. Always use an outdoor extension cord into an outdoor-rated power source.
• Stainless steel hooks. Sure, they'll hold up okay for awhile, but given the option, a zinc-plated product is better in an outdoor space. Zinc-plated hooks hold up better to moisture.

Install String Lights Securely With These Products

• Drill bits. You'll need a small drill bit to create a pilot hole through the siding and into the framing of the home. Whether you have vinyl siding, clapboard, or cement board siding, it's important to connect the strand of lights
• Strong hooks. Specifically, look for cup hooks or a Zinc-plated Lag Thread Screw Eye — either 3/8" or 5/16" should be heavy-duty enough. S-hooks are also good in a pinch, as are spring snap hooks and quick link locking carabiner clips. Explore your hardware options and choose screw hooks that work for your needs.
• Galvanized steel wire. If you have more than a 8' span, use a strong wire to take some of the weight off the electrical cord. A 14-gauge twisted metal cable wire is a great option. Zinc-plated wire rope clamps and turnbuckles are essential for securing and creating the desired tension for the wire.

1. Predrill Through the Siding

Think ahead as you plan your backyard makeover, and identify where best to drill through your siding. The lag thread screw will need to get through the siding and hit wood framing, so choose the area beneath your eave closest to the house, or the framing above a window. If you predrill and position your screw eye hooks at the same angle the strings of lights will extend from the house, you can minimize potential torquing on the screw as it holds in the siding and wall.

2. Attach the Lag Screw

Twist the hook eye lag bolt into the predrilled hole. Thread a screwdriver into the eye, and use the handle for leverage at twisting it deeper until the eye hook rests against the siding. If it's hard to turn, you're doing it right. The last thing you need is an eye hook in your siding that yanks loose under the tension of the string lights.

3. Connect Your Steel Wire

Use the rope clamps and turnbuckles to connect one end of the wire to the eye hook protruding from the wall.

4. Extend the Wire Where You Plan to Hang the Lights

Plan and install each eye hook you need to place along the route. Light posts can hold lightweight wire, but for strands of lights that are heavier, a deck railing, pergola post, or nearby tree is more secure. No need to install the lights yet (it just adds weight to the project). You'll install the lights once the wire is hung.

5. Connect the End of the Wire to the End Hook

Use another turnbuckle and a combination of clips and additional hooks to secure the end of the wire to the eye hook at the end of the strand. Twist the turnbuckles to pick up any unwanted slack along the length of the wire.

6. Hang Your Lights

Many string lights have built-in clips or hooks, while others attach to the wire more securely with zip ties. Extend the lights along the new string, continuously monitoring the hooks in the wall to make sure the added weight isn't torquing the eye hooks that are screwed into the siding.